|
Valby TG20
Excavator Demolition Grapple
The TG 20 demolition grapple can be used on
excavators weighing from 6 to 10 tons.
| Technical
Data |
|
|
Position |
Measurement |
| Max. Load |
5500 lbs |
A |
62" |
| Weight without
rotator |
1089 lbs. |
B |
35" |
| Max. gripping force |
7419 lb-force |
C |
28 ½" |
| Max Working Pressure |
5076psi |
E |
21" |
| Recommended
Rotator Rigid Mount |
KR10 |
|
| Recommended
Rotator Hanging Mount |
R12 |
|
The Valby demolition grapples are of "butt" type.
The wearparts butt together when the grapple is closed.
The wear parts are bolted on and exchangeable.
|
|
| Demolition grapples are
usually used with rigid rotators. The Valby grapples have the bolt hole pattern to accept
the Intermercato rotators. |
 |
 |
Every joint
had a grease fitting and a bronze bearing. |
| 