|
Home
Log Grapples
Demolition Grapples
Sorting Grapples
Clamshell Buckets
Mini Excavator Attachments
Hanging Rotator
Rigid rotator
| |
 |
GR-60 HD + R 12
For large truck loaders and medium size
excavators. Shown here with a hanging R 12 rotator. |
|
Valby GR-60HD |
| Max. gripping width |
60 ½" |
| Min. opening |
3½" |
| Max. lifting
capacity |
6600 lb. |
| Height. open |
38 3/8" |
| Height. closed |
23" |
| Width of wider claw |
17 ½" |
| Working pressure |
3625 psi |
| Jaw material |
Hardox |
| Weight |
550 lb. |
| Recommended Rotator: |
R 12 |
| Price of GR 60HD: |
$3700 |
| Price of grapple
with an R6 rotator: |
$5500 |
| Price of grapple
with an R12 rotator: |
$5870 |
 |
- Modern bypass grapple design.
- Hardox is a prime steel used in the manufacture
of high quality log grapples.
- All Valby grapples have a bronze bushing at every joint, and
every joint has a grease fitting.
- Large, powerful cylinder.
- Double connection rods provide good balance and less stress.
- A belly plate protects the
cylinder from underneath.
- Modern bypass grapple design
- The Valby bypass grapples have excellent geometry. The form
of the claws enables a smooth roll in of the stems. The grapples also close to a tight
minimum opening.
- Have been used to replace Kinshofer grapples and grapples on
Prentice loaders.
|
|
|
The jaws are made of Hardox and they
are over 3/4" thick. |
The mounting plate is almost an inch
thick and the boltholes match Intermercato and Indexator rotators. |
 |
 |
| |
Every joint has a bronze bearing and
a grease fitting |
Grapples of this size are often used on Prentice loaders and
for replacement of Kinshofer grapples.
|
